Mohamed Bashir MOHAMEDAli Bashir
Khartoum,SUDAN
Summary
Accomplished Operation Technical Support Engineer and Senior Dispatcher Engineer with extensive experience at the Sudanese Electricity Transmission Company in Khartoum. Expertise in fault analysis, system monitoring, load forecasting, and electrical network studies.
Overview
17
17
years of professional experience
1
1
Certification
Work History
Operation Technical Support Engineer
Sudanese Electricity Transmission Company
Khartoum
01.2015 - Current
- Modelling and data entry of a new network components in operating systems 'Siemens Sinaut Spectrum v.4.0', 'NARI OPEN 3000' in addition to NEPLAN, ETAP and PSSE Software.
- Performing electrical networks studies in order to analyze the network problems and to plan the network Operations, These studies includes: Load flow, Contingency analysis, Outages scheduling, Faults & Short Circuit Studies and reliability analysis.
- Performing preventive annual maintenance, corrective and urgent maintenance for different electrical components: transformers, and lines and bus bars.
- Monitor the network applications programs such as State estimator and other application which used as assistance analysis tools for making decision especially for outages forced outages.
- Supervision of DTS (Dispatcher Training Simulator) to Evaluate and make training for Dispatchers (operators).
- Performance reports of National Grid including voltage profile, Frequency.
- Fault Analysis for transmission equipment. Analyze disturbances in the network by using modern fault recorders.
- Projects that I involved in: Sudan-Egypt Interchange project: a conducted study to calculate the capacity of STATCOM needed for transferring 300 MW, covering all Contingencies of present and future transmission topology.
- Low frequency scheme updates studies by identifying suitable loads i.e. conforming with total load curves excluding hotlines loads considering over voltage scenarios.
Senior Dispatcher Engineer
Sudanese Electricity Transmission Company
Khartoum
01.2010 - 12.2014
- Monitoring National Grid operating condition of lines and equipment throughout SCADA system and makes adjustments or directs workers to as conditions warrant using NAS applications.
- Calculate load estimates according to corrected weather and consumer-demand records while maintaining stability and economic dispatch of the network using EMS applications.
- Management of the power flow in the National Grid by coordination between thermal power plants and hydro power plants according to the daily operation plan.
- Management of the power flow in the Interchange Tie-line.
- Good knowledge and Operation of EMS applications including AGC operation mode.
- Ensure 100% safety and prevent Human Error in execution of operations in different level of voltages 500kv, 220 kv,110 kv and 33kv.
- Following the necessary procedures and instructions in order to maintain safety and reliability of the grid.
- Preparation of daily report showing the total energy demanded, fuel consumed by the different thermal plants, trips and outages in transmission, forecasts of demands and other related information.
- Restore the Power Grid in case of disturbances and Blackouts.
Education
M.Sc. - Electrical Engineering (Microprocessors and control)
Sudan University of Science and Technology
Khartoum, Sudan2013
B.Sc. - Engineering (Control)
Sudan University of Science and Technology
Khartoum, Sudan2004
Skills
- Fault analysis
- System monitoring
- Load forecasting
- Electrical network studies
- Coordination of Preventive maintenance in electrical network at various eqipment
Languages
Arabic
English
References
Eng. Tarig Khalifa Gafar, Manager of National Load Dispatch Center (NLDC) in the Sudanese Electricity Transmission Company (SETCO)
Projects
- Sudan-Egypt Interchange project, A conducted study to calculate the capacity of STATCOM needed for transferring 300 MW, covering all contingencies of present and future transmission topology.
- Low frequency scheme updates studies, Identifying suitable loads conforming with total load curves excluding hotlines loads considering over voltage scenarios.
Training
- General electricity (electronics & communication), NEC Umharaz training center, Khartoum, Sudan, 2006-11-27, 2007-01-05
- Dispatching and Energy Management System (SCADA, EMS, NAS, AGC, and DTS), Electricity Generating Authority of Thailand (EGAT), Bangkok, Thailand, 2007-08-08, 2007-09-17
- Dispatching and Energy Management System (SCADA, EMS, NAS, AGC, and DTS), NARI TECHNOLOGY DEVELOPMENT COMPANY, Nanjing, China, 2009-12-12, 2010-01-08
- Power system Reliability & Power Quality and Harmonics Mitigation, NATIONAL POWER TRAINING INSTITUTE, Bengaluru, India, 2014-08-31, 2014-09-12
- NEPLAN Training Program on Load flow & Voltage stability, Zurich, Switzerland, 2015-03-03, 2015-03-16
- NARI Open 3000 Training program on Network Analysis System (NAS), NARI TECHNOLOGY DEVELOPMENT COMPANY, Nanjing, China, 2016-12-12, 2016-12-23
- PSSE software on Load flow & Contingency Analysis, Sudanese Electricity Transmission Company (SETCO), Khartoum, Sudan, 2021-05-01, 2021-05-16
- ISO45001:2018 Essentials and Requirements, African International Centre for Quality Management Systems, Khartoum, Sudan, 2021-07-22, 2021-12-27
Certification
- Level [Number] [Area of certification]
Hobbies and interests
- I do my exercises in swimming pool
Timeline
Operation Technical Support Engineer
Sudanese Electricity Transmission Company
01.2015 - Current
Senior Dispatcher Engineer
Sudanese Electricity Transmission Company
01.2010 - 12.2014
M.Sc. - Electrical Engineering (Microprocessors and control)
Sudan University of Science and Technology
B.Sc. - Engineering (Control)
Sudan University of Science and Technology